Scope Electronics Kit – F-11D Blaster

£42.50

£ GBP

£ GBP
€ EUR
$ USD

The (SCTroniX )Scope Electronics Kit – F-11D Blaster brings your 3D Printed F-11D Blaster Scope to life with an animated reticle and red dot laser.

This Scope Electronics Kit was designed to fit inside the F-11D First Order Blaster STL Files.

The Scope Electronics Kit is ONLY available as a Self Build Kit.

Scope Electronics Kit – F-11D Blaster Connections Guide.

Download Connections Guide

2 in stock

Select delivery location

Scope Electronics Kit – F-11D Blaster

This (SCTroniX) Scope Electronics Kit is designed for the F-11D First Order Blaster STL Files.

You can fit the Scope Electronics Kit on it’s own or incorporate it it with the F-11 Blaster Electronics Kit

This Electronics Kit is only available as a Self Build Kit.

Self Build Kit: You will need to solder both the switches, resistors, OLED Display and Laser LED using the included JST Leads to the Nano V3.0 SuperMini Microcontroller.

There is quite a bit os soldering required for this kit so some soldering skills are required.

If using the Scope Electronics Kit with the F-11D Blaster Electronics Kit, the scope power lead connects directly to the BLTroniX F-11D PCB (SC PWR).

or if you are just fitting the Scope Electronics Kit you connect it directly to a suitable battery.

I recommend using the following battery:

Battery Model: 18650 Li-Ion battery
Battery Size: 18mm x 65mm

These are readily available on eBay, Amazon and AliExpress.

Scope Functions – F-11D Blaster:

There are 2 buttons:

Button 1: Changes the scope display between 7 different animated displays.
Button 2: Switches the Red Dot Laser LED On/Off.

Scope Electronics Kit – F-11D Blaster includes the following components:

1 x Nano V3.0 SuperMini Microcontroller – pre-programmed with the SCTroniX Scope code
1 x 0.49″ OLED Display Module
1 x 3V Red Dot Laser LED x 1 (Red Dot Laser Sight)
2 x 6mm x 6mm 2-Pin Tactile Switches – Change Display and Laser LED On/Off
1 x 4-Pin Micro JST 1.25 Male and Female Lead – OLED Display
2 x 3-Pin Micro JST 1.25 Male and Female Lead – Change Display and Laser On/Off Switches
1 x 2-Pin Micro JST 1.25 Male and Female Lead – Laser Power
1 x 2-Pin JST PH2.0 Lead – Scope Power to Blaster PCB (SC PWR) or Battery
2 x 10K Resistors – Scope Switches

Very Important: Please make sure you double check the polarity of all connections before attaching any power.

Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills.
DIY electronic self build or part built kits do not include lead wires.

Before placing your order, please make sure you are fully aware of the Shipping Policy.

Electronics Guide

Scope Electronics Kit Connections Guide – F-11D Blaster

Download Connections Guide View Connections Guide

Video

The 3D Printed Scope shows one for the E-11 Blaster but the electronics are much the same.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Scope Electronics Kit – F-11D Blaster

This Scope Electronics Kit was designed to fit inside the F-11D First Order Blaster STL Files.