NN-14 Blaster Electronics Kit

NN-14 Blaster Pistol (Rey’s Blaster) Electronics Kit

The NN14 Blaster Electronics Kit is designed to fit in the my NN-14 Blaster Pistol STL Files.

This Electronics Kit is only available as a Part Built Kit.

Part Built Kit: It has headers for the Arduino Nano, DFPlayer Mini, PAM8403 Amplifier pre soldered to the PCB along with all the JST sockets & resistors.

So you just need to solder the JST leads to the switches, (Optional) OLED display, LEDs speaker etc. (So some soldering skills are required)

The only component you need to supply is a suitable battery.

I recommend using the following battery:

Battery Model: 18650 Li-Ion battery
Battery Size: 18mm x 65mm

These are readily available on eBay, Amazon and AliExpress.

NN-14 Blaster Weapon Display Options:

You have the option to add a 0.66″ OLED Display to the left side panel. 

• 0.66″ OLED Display 64×48 pixels 

Having the OLED Display is purely optional but you have the option to add one to your order.

Please select YES or NO to add the display before adding the kit to the basket or checking out.

NN-14 Blaster Functions:

• Trigger: Plays selected weapon sound and also triggers the barrel LED strips and barrel end fire LED
• Select Button: Select one of 10 different weapons, Selection of Theme Tunes and Various Stormtrooper Phrases
  • 1. NN-14 Blaster
  • 2. Stun Blaster
  • 3. AT-AT
  • 4. Boba Flame
  • 5. Bowcaster
  • 6. X-Wing
  • 7. Tie Fighter
  • 8. .44 Magnum
  • 9. Mauser K98
  • 10.  UZI Machine Gun
  • 11. Theme Tunes
  • 12. BB-8 Phrases
• Reload Button: Reloads the selected weapon
• Laser Button: Turns the ed Dot Laser on/off

The NN-14 Blaster Electronics Kit includes the following components:

• NN-14 PCB Board with all resistors, headers and sockets pre-soldered.
• Arduino Nano (or compatible) Micro Controller pre-programmed with the NN-14 Blaster Pistol code
• DFPlayer Mini MP3 Player
• PAM8403 Amplifier
• Micro SD-Card with Sounds Pre-Loaded
• 3W 4 Ohm Speaker with Lead
• 6mm x 7mm Tactile Switches (Trigger & Red Dot Laser On/Off) x 2
• 6mm x 4mm Tactile Switches (Weapon Select & Weapon Reload x2
• Red Dot Laser Diode LED
• Single WS2812B LED (Fire LED)
• WS2912B LED Strip (Barrel LEDs) x2
• 2 Pin JST PH-2.0 Leads & Sockets – (Select, Reload, Trigger, Laser LED On/Off, Laser LED Power, Speaker & Battery) x7
• 3 Pin JST PH-2.0 Lead & Socket – LED Strip
• Mini Slide Switch (Power On/Off)
• TP4056 Battery Charge Board (For Charging the Battery)
• PropTroniX 18650 Battery Holder – For the Battery

Optional Components

• 0.66″ OLED Display (Optional)
• 4 Pin JST PH-2.0 Lead – OLED Display

Very Important: Please make sure you double check the polarity of all connections before attaching any power.

Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills.
DIY electronic self build or part built kits do not include lead wires.

Before placing your order, please make sure you are fully aware of the Shipping Policy.