F-11D Blaster Electronics Kit

F-11D First Order Blaster Electronics Kit

The F-11D First Order Blaster Electronics Kit is designed to fit in the my F-11D First Order Blaster STL Files.

This Electronics Kit is only available as a Part Built Kit.

Part Built Kit: It has headers for the Arduino Pro Mini, DFPlayer Mini pre soldered to the PCB along with all the JST sockets, resistors & transistor.

So you just need to solder the JST leads to the switches, OLED display, speaker etc. (So some soldering skills are required)

The only component you need to supply is a suitable battery.

I recommend using the following battery:

Battery Model: 18650 Li-Ion battery
Battery Size: 18mm x 65mm

These are readily available on eBay, Amazon and AliExpress.

F-11D Blaster Weapon Display Options:

You can choose between the following OLED Display colours for the Hengstler. 

• White 
• Blue
• Yellow

Please select which colour you would like before adding the kit to the basket or checking out.

F-11D Blaster Functions:

• Trigger: Plays selected weapon sound and also triggers the barrel LED strips and barrel end fire LED
• Select Button: Select one of 10 different weapons, Selection of Theme Tunes and Various Stormtrooper Phrases
  • 1. F-11D Blaster
  • 2. Stun Blaster
  • 3. AT-AT
  • 4. Boba Flame
  • 5. Bowcaster
  • 6. X-Wing
  • 7. Tie Fighter
  • 8. .44 Magnum
  • 9. Mauser K98
  • 10.  UZI Machine Gun
  • 11. Theme Tunes
  • 12. Stormtrooper Phrases
• Reload Button: Reloads the selected weapon
• Flashlight Button: Turns the front Tactical Flashlight on/off
• Scope Button: Turns the Scope display on/off (if the F-11D Scope Kit is fitted)

The F-11D Stormtrooper Blaster Electronics Kit includes the following components:

• BLTroniX Blaster PCB Board with all resistors, sockets and headers pre-soldered
• Arduino Pro Mini Microcontroller pre-programmed with the BLTroniX F-11D Blaster Code
• DFPlayer Mini MP3 Player
• Micro SD-Card with Sounds Pre-Loaded
• Speaker
• 0.91″ OLED Display (Choice of Screen Display Colour, White, Yellow or Blue)
• Double Sided Sticky Pad (To hold the 0.91″ OLED in place in the Hengstler Counter)
• 2 Strips of 22 WS2912B LEDs (Barrel LEDs)
• Single WS2812B LED (Fire LED)
• Piranha White LED (Tactical Flashlight)
• 6 x 6 x 8mm Tactile Push Button Switch (Trigger)
• 12 x 12 x 9mm Tactile Push Button Switch (Secondary Trigger – Weapon Select)
• 12 x 12 x 7mm Tactile Push Button Switch (Flashlight & Scope ON/Off Buttons) x 2
• 6mm x 4mm x 3mm Tactile Push Button Switch (Hengstler – Weapon Reload)
• 4 Pin JST PH Lead (OLED Display)
• 3 Pin JST PH Lead (LED Strips & Fire LED)
• 2 Pin JST PH Leads (For Trigger, Weapon Select, Weapon Reload, Scope Power, Scope On/Off, Flashlight Power, Flashlight On/Off & Battery)
• Mini On/Off Slide Switch (Turn Blaster On/Off) x 8
• TP4056 Battery Charge Board (For Re-Charging the Battery)
• Red Piranha LED’s (For Hengstler & Magazine Lights) x 2
• 68R Resistors (For Hengstler & Magazine Piranha Red LED’s) x2
• PropTroniX 18650 Battery Holder (Battery Holder)

Very Important: Please make sure you double check the polarity of all connections before attaching any power.

Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills.
DIY electronic self build or part built kits do not include lead wires.

Before placing your order, please make sure you are fully aware of the Shipping Policy.