Thermal Detonator Electronics Kit
Price range: £42.99 through £52.99
The TDTroniX Star Wars Thermal Detonator Electronics Kit brings your 3D Printed Thermal Detonator to life with Lights and Sounds.
Electronics Kit for the Thermal Detonator STL Files.
The Electronics Kit was designed to fit into my Thermal Detonator STL Files
The Electronics Kit is available as either a Part Built Kit or a Pre-Built Kit
Thermal Detonator Electronics Connections Guide
Download Instruction GuideThermal Detonator Electronics Kit
The Thermal Detonator Electronics Kit is designed to fit in the my Thermal Detonator STL Files.
This Electronics Kit is available as either a Part Built Kit or a Pre-Built Kit ready to install into the 3D Printed Thermal Detonator
Part Built Kit: Has the Seeeduino XIAO, DFPlayer Mini, JST sockets, resistors & vibration switch pre-soldered to the PCB’s.
You just need to solder the JST leads to the 4 LED’s, speaker, lever switch, auxiliary switch and battery, so some soldering skills would be needed.
Pre-Built Kit: Comes with everything pre soldered ready to install into your 3D Printed Thermal Detonator.
The only component you need to supply is a suitable battery.
I recommend using the following battery:
Battery Model: 1S 3.7V 220mAh LiPo Battery 35C
Battery Size: 25mm x 17mm x 7mm (Approximately)
These are readily available on eBay, Amazon and AliExpress.
The Thermal Detonator Electronics Kit includes the following components:
- TDTroniX PCB Boards – 1 for the Seeeduino XIAO the other for the DFPLayer Mini
- Seeeduino XIAO Micro Controller pre-programmed with the TDTroniX Thermal Detonator Code
- DFPlayer Mini MP3 Player
- Micro SD-Card with Sound Files Pre-Loaded
- 28mm Speaker
- 5mm Red LED (Top LED)
- 3 x 2mm Yellow Tower LED’s (3 Front LED’s)
- Micro Lever Switch (On.Off Switch)
- 6mm Tactile Switch (Auxiliary Switch)
- Vibration Sensor
- 7 x Micro JST 1.25mm Sockets (4 x LED’s, On/Off Switch. auxiliary Switch & Speaker)
- 7 x Micro JST 1.25mm Leads (4 x LED’s, On/Off Switch. auxiliary Switch & Speaker)
- 1 x JST PH 2.0mm Socket (For Connecting the Battery to PCB)
- 2 x JST PH 2.0mm Lead (Battery)
- 1 x Battery Charger Module
- 1 x JST PH 2.0mm Female Lead (For Battery Charger Module)
Very Important: Please make sure you double check the polarity of all connections before attaching any power.
Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills.
DIY electronic self build or part built kits do not include lead wires.
Before placing your order, please make sure you are fully aware of the Shipping Policy.
Electronics Guide
| Please Select Kit Type | Part Built Kit, Pre-Built Kit |
|---|
Video
Only logged in customers who have purchased this product may leave a review.
You might also like....
Reviews
There are no reviews yet.