E-11 Blaster Electronics Kit

E-11 Stormtrooper Blaster Electronics Kit

The E-11 Stormtrooper Blaster Electronics Kit is designed to fit in the my E-11 Stormtrooper Blaster STL Files.

This Electronics Kit is only available as a Part Built Kit.

Version 5.00 Changes:

• • NEW PCB – The Electronics PCB is now designed to be fitted in the Hengstler Counter which makes wiring a lot easier and easier to access.
  • New rotary On/Off Switch – More reliable and makes the selector switch function as it should. Three position, First Position – Blaster OFF, Second Position – Blaster OFF, Third Position – Blaster ON
  • Scope Electronics Socket in the PCB is now Powered directly from the battery so no On/Off Switch – More reliable as better voltage.

Part Built Kit: The PCB has the headers for the Arduino Pro Mini and DFPlayer Mini pre soldered to the PCB along with all the JST sockets and resistors

So you just need to solder the JST leads to the switches, OLED display, speaker etc. (So some soldering skills are required)

The only component you need to supply is a suitable 18650 Li-Ion battery.

Battery Size: 18mm x 65mm

These batteries are readily available on eBay, Amazon and AliExpress.

E-11 Blaster Weapon Display Options:

You can choose between the following OLED Display colours for the Hengstler. 

• White 
• Blue
• Yellow

Please select which colour you would like before adding the kit to the basket or checking out.

E-11 Blaster Functions:

• Trigger: Plays selected weapon sound and also triggers the barrel LED strips and barrel end fire LED
• Select Button: (Short Press) Select one of 10 different weapons, Selection of Theme Tunes and Various Stormtrooper Phrases
  • 1. E-11 Blaster
  • 2. Stun Blaster
  • 3. AT-AT
  • 4. Boba Flame
  • 5. Bowcaster
  • 6. X-Wing
  • 7. Tie Fighter
  • 8. .44 Magnum
  • 9. Mauser K98
  • 10.  UZI Machine Gun
  • 11. Theme Tunes
  • 12. Stormtrooper Phrases
• Select Button: (Long Press) Starts the background Radio Chatter Mode. Around an hour long sound file of background radio chatter.
• Reload Button: Reloads the selected weapon

The E-11 Stormtrooper Blaster Electronics Kit includes the following components:

• BLTroniX Blaster Version 4.00 PCB Board with all headers, sockets and resistors pre-soldered
• Arduino Pro Mini Microcontroller pre-programmed with the BLTroniX E-11 Stormtrooper Blaster Code
• DFPlayer Mini MP3 Player
• Micro SD-Card with the E-11 Sounds Pre-Loaded
• Speaker with JST PH 2.0 Lead
• 0.91″ OLED Display (Choice of Screen Display Colour, White, Yellow or Blue)
• Double Sided Sticky Pad (To hold the 0.91″ OLED in place in the Hengstler Counter)
• Micro Lever Switch (Trigger)
• Rotary Selector Switch (Switching the Blaster power On and Off 
• 6 x 6mm Momentary Tactile Switch (Weapon Select)
• 6 x 4mm Momentary Tactile Switch (Hengstler – Weapon Reload)
• Single WS2812B LED (Fire LED)
• Strip of 17 WS2912B LEDs (Barrel LEDs)
• 4 Pin JST PH 2.0 Lead for the OLED Display
• 3 Pin JST PH 2.0 Lead for the LED Strip & Fire LED
• 2 Pin JST PH 2.0 Leads x 4 – Trigger, Weapon Select, Weapon Reload On/Off Switch
• PropTroniX 18650 Battery Holder
• TP4056 Battery Charge Board with JST PH 2.0 Lead

Very Important: Please make sure you double check the polarity of all connections before attaching any power.

Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills.
DIY electronic self build or part built kits do not include lead wires.

Before placing your order, please make sure you are fully aware of the Shipping Policy.