F-11D Blaster Electronics Kit V2.0 

This kit is available as either a self build or as a pre-built electronics kit for the Star Wars F-11D Blaster Rifle.

Self Build Kit - Some soldering is required to solder the JST Leads to the Switches, OLED Display, Neopixel Strip, Single Neopixel, Speaker, On/Off Switch & Battery Charger.

Pre-Built Kit - Some wires will need to be shortened or cut to fit inside your Blaster so some soldering may be required when installing.

I recommend using 30awg silicone wire for connecting all switches as this wire is thin and very flexible.

The F-11D Blaster Rifle Electronics Kit comprises the following components:

• 1 x BLTroniX PCB Board with all resistors, sockets and headers pre-soldered.
• 1 x Arduino Pro Mini Microcontroller pre-programmed with the BLTroniX V2.0 F-11D Blaster Code
• 1 x DFPlayer Mini MP3 Player 
• 1 x Micro SD-Card with Sounds Pre-Loaded
• 1 x PAM8403 Amplifier
• 1 x 3W 4Ohm Speaker
• 1 x 0.91" OLED Display
• 1 x Double Sided Stick Pad
• 2 x WS2912B Barrel LED Strips - Strip of 22 LED's
• 1 x Single WS2812B LED - Fire LED
• 1 x Piranha White LED - Tactical Flashlight
• 1 x 20mm Round Glass Cabochon - Flashlight Lens
  
• 1 x 6 x 6 x 8mm Tactile Push Button Switch - Trigger Fire
• 1 x 12 x 12 x 9mm Tactile Push Button Switch - Secondary Trigger Weapon Select
• 2 x 12 x 12 x 7mm Tactile Push Button Switch - Flashlight & Scope ON/Off Buttons
• 1 x 6mm x 4mm x 3mm Tactile Push Button Switch - Hengstler Weapon Reload
• 1 x 4 Pin JST PH Lead - OLED Display
• 1 x 3 Pin JST PH Lead - LED Strips & Fire LED
• 8 x 2 Pin JST PH Leads - For Trigger, Weapon Select, Weapon Reload, Scope Power, Scope On/Off, Flashlight Power, Flashlight On/Off & Battery
• 1 x Mini On/Off Slide Switch - Turn Blaster On/Off
• 1 x TP4056 Battery Charge Board - For Re-Charging the Battery
• 2 x Red Piranha LED's - For Hengstler & Magazine Lights
• 2 x 68R Resistors  - For Hengstler & Magazine Piranha Red LED's
• 1 x Square Red Diffuser - For Hengstler & Magazine LED's
  
• 1 x PropTroniX 18650 Battery Holder  - For the Battery

Don't forget to add the following products to your order:

F-11D Blaster Rifle STL Files:

These STL Files were designed by me especially for my F-11D Blaster Electronics - Available on my STL Site Galactic Props.

F-11D Blaster Rifle Scope Electronics Add-On Kit:

The add-on Scope Electronics kit includes the components to add an animated scope display to your F-11D Blaster Rifle.

F-11D Blaster Rifle STL Hardware Kit:

The F-11D Blaster Rifle STL Hardware kit includes all the screws and springs etc used in the build.

Checkout the video of Version 1 on YouTube - https://youtu.be/h4dVPKXBI-k

I will be doing an updated video soon

Please Note: The kit does NOT include a battery. 

Due to international postal restrictions regarding the shipping batteries I am unable to include them in the kits for buyers outside the UK.

I recommend using a 3.7V 18650 battery, 

These are readily available on eBay and Amazon.

Very Important Notice:

Please make sure you double check the polarity of all connections before attaching any power.

Package Includes:

• 1 x F-11D Blaster Rifle Electronics Kit V2.0

Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills. DIY electronics do not include lead wires, instructions or warranties.

Before placing your order, please make sure you are fully aware of the shipping policy outlined here: Shipping Policy.