BLTroniX PCB V2.10 - E-11 & F-11D 

What's NEW 

The PCB now incorporates a small Transistor to make the Scope switch on as soon as the button is pressed, no more delay in the Scope Powering on.

Designed for both the E-11 and F-11D Blasters (Using different code)

BLTroniX Blaster PCB Board V2.10 

The BLTroniX V2.10 Blaster PCB board comes with all resistors and the transistor pre soldered in place and is fully tested.

Arduino Nano - Blaster Board PCB dimensions - 23.75mm Wide x 126.5mm Long - Please make sure this will fit inside you blaster

Arduino Pro Kini - Blaster Board PCB dimensions - 23.75mm Wide x 119.75mm Long - Please make sure this will fit inside you blaster

It is designed to be used with either an Arduino Pro-Mini or Arduino Nano Microcontroller programmed with either the BLTroniX E-11  or F-11D Blaster Code

FREE - E-11 BLASTER ARDUINO CODE - FREE 

This PCB will also work with my FREE E-11 Blaster Code which is available on GitHub

You can use the SCOPE POWER connector for the LASER LED POWER and the SCOPE SWITCH connector for the LASER LED ON/OFF SWITCH.

It is NOT designed to use the Magazine Detection Switch so please use the code - Arduino-E-11-V1.0-NO_MAG

If you want to incorporate the Magazine Detection Switch and use that code you will have to wire the Magnetic Reed Switch directly to the Arduino Pro-Mini Pin D6, +5V and GND with a 10K Resistor.

.

Options:

Please choose which PCB you require (Arduino Nano or Arduino Pro Mini) in Available Options before purchasing. 

The PCB has Connections for:

• Arduino Pro Mini
• PAM8403 Class D Amplifier
• DFPlayer Mini
• Trigger Button
• Weapon Select Button
• Weapon Reload Button
• Barrel LED Strip and Fire LED
• 0.91" OLED Display (Optional)
• Scope On/Off Button
• Scope Power
• 2 x Speakers (2nd speaker is Optional)
• Flashlight Power (F-11D ONLY)
• Flashlight On/Off Button (F-11D ONLY)
• Battery Power

You will need to purchase the Arduino Pro-Mini and all other components separately to complete your Blaster.

Package Includes:

• 1 x BLTroniX Blaster PCB V2.10 for E-11 or F-11D Blasters (Pro Mini or Nano)

Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills. DIY electronics do not include lead wires, instructions or warranties.

Before placing your order, please make sure you are fully aware of the shipping policy outlined here: Shipping Policy