Tilt Vibration Sensor Switch - SW-100

The switch is manufactured using metal, mercury switches and electrical characteristics are similar but not dangerous mercury switches and environmental issues, and have the same characteristics as the single shaking when conducting, the assembly is more convenient safe to use.

Unidirectional characteristics: The switch is in a stationary state, as shown in FIG larger end (ON) side, below the level of 45 degrees, the switch is in the ON state, the smaller end (OFF) side, and the level of the product when tilted to the OFF side of the switch is open state when subjected to external shaking forces achieved by shaking, or conduction angle is set at an angle (45-90)) when the range, the conductive pin electrical characteristics will produce short or continuous conduction pass; when the switch is OFF ends below the horizontal angle, when the shaking is difficult to trigger conduction.

Bidirectional characteristics: conducting terminal at both ends, in a stationary state when the switch, the switch 45 degrees to either side of the tilt switch are ON state when subjected to external shocks or vibrations, the conduction angle or the intensity reaches the switch will produce short-term or continuous conduction;

When you want to restore the electrical characteristics of the open state (OFF), switch to set the environment must be static, and (OFF) below the level required to set up the open end angle.

Package Includes:

• 1 x SW-100 Tilt Vibration Sensor Switch

Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills. DIY electronics do not include lead wires, instructions or warranties.

Before placing your order, please make sure you are fully aware of the shipping policy outlined here: Shipping Policy